Cisco Router Module Cisco ASR 9000 Adapter SPA-1XCHSTM1/OC3 1-port Channelized STM-1/OC-3c to DS0 Shared Port Adapter

2960 SFP Module SPA-1XCHSTM1/OC3 1-Port Channelized STM-1/OC-3 to DS-0

Cisco SPA-1XCHSTM1/OC3 Specification:

SPA-1XCHSTM1/OC3 Specifications
Product compatibility	· Cisco 7600 Series Routers · Cisco ASR 1000 Series Routers · Cisco ASR 9000 Series Routers
Minimum software version	· Cisco 7600 Series Routers: Cisco IOS® Software Release 15.4(2)S and Cisco IOS XE Software Release 3.12.0.0S · Cisco ASR 1000 Series Routers with Cisco IOS XE Software Releases 3.12.0,3.11.2, and 3.10.3 · Cisco ASR 9000 Series Routers with Cisco IOS XR Software Release 5.2.0
Protocols	Serial encapsulations: · High-Level Data Link Control (HDLC) · Point-to-Point Protocol (PPP), RFC 1662 · Frame Relay, RFC 1490 Multilink support (bundle limit dependent on number of links per bundle; maximum of 12 links per bundle): · Multilink PPP (MLPPP), RFC 1990 · Link fragmentation and interleaving (LFI) over Frame Relay (FRF.12) and MLPPP Networking protocols: · IPv4/IPv6
Cards, ports, and slots	1 port
Connectivity	OC-3/STM-1 Small Form-Factor Pluggable (SFP) optics module (refer to optical parameters in Table 2)
Features and functions	Up to 84 T1 (or 3 T3) or 63 E1 (or 3 E3) ports Up to 1022 n x DS-0 channels (where n is 1 to 24) with no T3 ports configured Up to 400 n x DS-0 channels (where n is 1 to 24) with one or more T3 ports configured Support for Channelized OC-3 to T1, Channelized STM-1 to E1, clear channel T3/E3, subrate T3/E3, full-rate T1, clear channel E1, and Channelized T1/E1 SONET multiplexing: · OC-3 <-> STS-3 <-> STS-1 <-> VTG <-> VT1.5 <-> T1 <-> N x DS-0 · OC-3 <-> STS-3 <-> STS-1 <-> T3 <-> T1 <-> N x DS-0 · OC-3 <-> STS-3 <-> STS-1 <-> T3 · OC-3 <-> STS-3 <-> STS-1 <-> T3 <-> E1 <-> n x DS-0 SDH multiplexing: · STM-1 <-> AUG <-> AU-4 <-> VC-4 <-> TUG-3 <-> TUG-2 <-> TU-12 <-> VC-12 <-> E1 <-> n x DS-0 · STM-1 <-> AUG <-> AU-4 <-> VC-4 <-> TUG-3 <-> TU-3 <-> VC-3 <-> T3/E3 · Internal or line-derived (loop) clocking, independently selectable on each T1 or E1 tributary Loopback capabilities: · Local and remote loopback at the T3/T1 level · Network loopback at the STM-1/OC-3, T3/E3, and T1/E1 levels · Response to embedded loopback commands · Insertion of loopback commands into transmitted signal · Bit error rate testing (BERT) pattern generation and detection per channel · Programmable pseudorandom pattern up to 32 bits in length · T3/E3: All 0s, all 1s, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24 · T1/E1: All 0s, all 1s, 211, 215, 220, 220 QRSS, 223, alternating 0s and 1s, 1-in-8, and 3-in-24 · 32-bit error-count and bit-count registers · Detection of test patterns with bit error rates up to 10-2 · 24-hour history maintained for error statistics and failure counts, at 15-minute intervals · 16- and 32-bit cyclic redundancy check (CRC); 16-bit default SONET/SDH-specific features: · Compliance with G.707, G.783, G.784, G.957, G.958, and GR-253 · Supported SONET/SDH alarm and signal events: ◦ Signal failure bit error rate (SF-BER) ◦ Signal degrade bit error rate (SD-BER) ◦ Signal label payload construction (C2) ◦ Path trace byte (J1) · Section ◦ Loss of signal (LoS) ◦ Loss of frame (LoF) ◦ Error counts for B1 Line · Line alarm indication signal (LAIS) · Line remote defect indication (LRDI) · Line remote error indication (LREI) · Error counts for B2
	Path · Path alarm indication signal (PAIS) · Path remote defect indication (PRDI) · Path remote error indication (PREI) · Error counts for B3 · Loss of pointer (LOP) · New pointer events (NEWPTR) · Positive stuffing event (PSE) · Negative stuffing event (NSE) · Path unequipped indication signal (PUNEQ) · Path payload mismatch indication signal (PPLM) T3-specific features: · Channelized T3 with 28 DS-1 lines or 21 E1 lines multiplexed into a T3 · Unchannelized T3 supporting subrate and scrambling formats for Digital Link, ADC/Kentrox, Larscom, Adtran, and Verilink data service units (DSUs) · C-bit or M23/M13 framing · Maintenance data link (MDL) · T3 far-end alarm and control (FEAC) channel support · Alarm monitoring · Alarm indication signal (AIS) · Out of frame (OOF) · Far-end receive failure (FERF) · Performance data collection: ◦ Framing bit errors (FERR) (F- or M-bit errors) ◦ P-bit error counts (path-parity errors) ◦ C-bit error counts ◦ Far-end block error (FEBE) counts E3-specific features: · G.751 framing · Alarm monitoring · AIS · OOF · FERF · Performance data collection: ◦ Framing pattern errors ◦ BIP-8 error counts (path-parity errors) ◦ FEBE counts · T1-specific features: ◦ D4 Super Frame (SF) or Extended Super Frame (ESF) framing ◦ ANSI T1.403 and AT&T TR 54016 Facility Data Link (FDL) support ◦ Alarm monitoring ◦ AIS ◦ OOF ◦ Far-end alarm failure (yellow or distant alarm) Performance data collection: · CRC/bit errors · Framing bit errors · Line errored seconds · Far-end errored seconds · Far-end severely errored seconds · Far-end unavailable seconds E1-specific features: · CRC4 or non-CRC4 framing in conformance with ITU-T G.703 and G.704 · Alarm monitoring · AIS · OOF · Remote alarm indication (RAI) · Performance data collection · CRC/bit errors · Framing bit errors · FEBE
Reliability and availability	OIR Field-replaceable SFP optics modules Support for both 1 + 1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols Single SPA software reset
MIBs	RFC 2558 MIB (SONET/SDH) RFC 2495 MIB (T1/E1) RFC 2496 MIB (T3/E3)
Network management	Simple Network Management Protocol (SNMP)
Physical specifications	Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm)
Regulatory compliance	CE marking Safety: UL/CSA/IEC/EN 60950-1, IEC/EN 60825 Laser Safety, AS/NZS 60950, FDA Code of Federal Regulations Laser Safety EMC: FCC Part 15 Class A, ICES 003 Class A, AS/NZS 3548 Class A, CISPR 22 Class B (up to 1GHz), EN55022 Class B (up to 1GHz), VCCI Class A, BSMI Class A, EN 300 386 Telecommunications Network Equipment (EMC), EN50082-1/EN61000-6-1 Generic Immunity Standard, EN55022 Information Technology Equipment (Emissions), EN55024 Information Technology Equipment (Immunity), IEC/EN61000-3-2 Power Line Harmonics, IEC/EN61000-3-3 Voltage Fluctuations and Flicker, IEC/EN61000-4-2 Electrostatic Discharge Immunity (8kV contact, 15kV air), IEC/EN61000-4-3 Radiated Immunity (10V/m), IEC/EN61000-4-4 Electrical Fast Transient Immunity (2kV power, 1kV signal), IEC/EN61000-4-5 Surge AC Port (4kV CM, 2kV DM), IEC/EN61000-4-5 Surge Signal Port (1kV), IEC/EN61000-4-5 Surge DC Port (1kV), IEC/EN61000-4-6 Immunity to Conducted Disturbances (10Vrms), IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30A/m), IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations, GR-1089-CORE NEBS EMC and Safety, GR-63-CORE NEBS Physical Protection, SR-3580 NEBS Criteria Levels (Level 3) Telecom (OC3): GR-253 Telecom (STM-1): G.783, G.957
Environmental Specifications	Operating temperature: 41 to 104°F (5 to 40°C) Storage temperature: -38 to 150°F (-40 to 70°C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity

Ordering infomation: