
The Cisco 3925 router, modular Services Performance Engine (SPE) 100, which can be upgraded for even higher performance as next-generation WAN environments evolve.
Table 2 shows the LEDs area description.
LED | Description | |
SYS status LED | Solid green | Solid green indicates normal operation. |
Blinking green | System is booting or is in ROM monitor mode. | |
Amber | System error. | |
Off | Power is off or system board is faulty. | |
ACT status LED | Solid or blinking green | Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port. |
Off | No packet transfers are occurring. | |
POE | Green | IP phone power is on. |
Amber | IP phone power is not on. | |
PS1 / PS2 | Green | System is running. |
Amber | System is not running. |
Figure 3 shows the back panel of the Cisco router 3925/K9 with LEDs.
Note:
① Compact flash 0 and 1 (0, right) ② ISM ③ PVDM3 0,1,2 and 3 (0, far right) ④ EN (Enable USB console) ⑤ EN (Enable RJ-45 console) ⑥ SFP S ⑦ SFP EN ⑧ S (Speed) ⑨ L (Link)
Table 3 shows the description of these LEDs on the back panel.
LED | Color | Description | Location |
CompactFlash 1 | Green | Flash memory is busy. | Back Panel |
Amber | Initialized with error. | ||
Blinking Green then turns off | CompactFlash is ready for removal. | ||
CompactFlash 0 | Green | Flash memory is busy. | Back Panel |
Amber | Initialized with error. | ||
Blinking Green then turns off | CompactFlash is ready for removal. | ||
S (Speed) | 1 blink + pause | GE port operating at 10 Mb/s. | Back Panel |
2 blink + pause | GE port operating at 100 Mb/s. | ||
3 blink + pause | GE port operating at 1000 Mb/s. | ||
L (Link) | Green | GE link is established. | Back Panel |
Off | No GE link is established. | ||
EN (RJ-45 console port) | Green | The RJ-45 console port is active. | Back Panel |
EN (USB serial console port) | Green | The USB console port is active. | Back Panel |
ISM | Green | Initialized. | Back Panel |
Amber | Initialized with error. | ||
Off | Not installed. | ||
PVDM3 0,1,2 and 3 | Green | PVDM is initialized. | Back Panel |
Amber | PVDM is detected but not initialized. | ||
Off | No PVDM installed. | ||
SFP S | Blinking green | Blinking frequency indicates port speed. | Back Panel |
SFP EN | Off | Not present. | Back Panel |
Green | Present and enabled. | ||
Amber | Present with failure. |
LonRise Equipment Co. Ltd.
The Formation of Lonrise
My Company was founded in 2007 as Cisco distributor and integrator domestically.
After 4 years' steadfast development, it spotted the business abroad. Thus Lonrise stepped on the road as a global CISCO supplier which has owned a good reputation within field .
We not only gain a continued trust from old customers but also attract many new customers.
Lonrise company structure
ABOUT US
Lonrise is specialized in supplying new original sealed Cisco equipment. Our product can create tremendous cost effectiveness for our customer. Our superior service makes our customer's purchasing process a comfortable journey. Lonrise concentrates on the construction of Cisco equipment supply Channel. We are the superior network equipment supplier and source of Cisco new equipment. We are the first choice of your Cisco product source.
Our Office in ShangHai:
Business Partners:
Awards Wall:
Lonrise Team:
Lonrise can low your cost of networking infrastructure. We supply new Cisco equipment around 65%-90% based on global list price. We endeavor to keep our price as low as possible. And meanwhile we struggles to give our best service till each details.
Lonrise supplies all new factory sealed Cisco equipment, including Cisco Routers, Cisco Switches, Cisco Firewall, Cisco module and relative Cisco software and license.
Lonrise people believe that only through creditable management and utmost service, we can win reputation for our company.