
Product overview for 150E-L model slurry pump
Structure: The L-type light slurry pump is a cantilever. The discharge position of the horizontal double-shell axial suction centrifugal slurry pump can be installed at 45 °C intervals and rotated at eight different angles.
Material: The pump body of the L-type light slurry pump has a replaceable wear-resistant metal lining. The over-flow parts such as impeller, sheath and guard plate are made of wear-resistant metal.
Use: Compared with heavy-duty slurry pump, the pump has high speed, small volume and light weight, and is suitable for conveying fine particles. The weight concentration of low-concentration slurry or corrosive slurry conveying slurry is generally not more than 30%. It can be used to transport high concentration and low abrasive slurry.
Sealing form: The shaft seal of the pump can be sealed by packing, auxiliary impeller seal, packing plus auxiliary impeller seal, mechanical seal and so on.
Transmission type: DC direct transmission, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive and other types.
Type meaning of 300S-L model slurry pump
Type meaning for 150E-L model slurry pump | |
150E-L(R) | |
150 | Discharge Diameter (mm) |
E | Support Type |
L | Light Model Low abrasion slurry pump |
R | Natural Rubber Liner |
Quality control for 300S-L model slurry pump
Inspection Equipment | |
1. Inspection and Detection | |
With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials | |
Complete pump set inspection | |
We have performance testing platform for each batch pump inspection before delivery | |
Quality control system for each set slurry pump | |
Purchasing raw material ra | 1. Strict rules and procedures to choose the raw material supplier |
2. Each batch raw material will be tested by quality control department | |
C casting of parts | 1 .Melting:Chemical element analysis for raw material before and after stove . |
2.Moulding :Strict sand moulding qualified before iron liquid pouring for casting | |
3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. | |
| 1. Self -inspection and inspection between different steps. |
2. First part inspection | |
3. Procedures inspection | |
4..Inspection before storage the mining slurry pumps | |
A Assembling of sl slurry pump | 1. Inspector tracks the whole process of assembly of slurry pumps |
2. Slurry Pump pressure inspection and fillout the testing table | |
3. Painting inspection | |
4. Performance testing and fillout the testing table | |
5. Packing inspection of slurry pump | |
6. Issue quality certificate |
Performance Chart
type | Max. | ClearWaterPerformance | Impeller | Application | |||||
Capacity | Head/m | Speed/rpm | Efficiency | NPSH | Nos | Diameter | |||
20 A-L | 7.5 | 2.34-10.8 | 6-37 | 1400-3000 | 30 | 3.5-8 | 4 | 152.4 | -Ball mill discharge |
50 B-L | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
75 C-L | 30 | 18-151 | 4-45 | 900-2400 | 57 | 4 | 229 | -Rod mill discharge | |
100 D-L | 60 | 50-252 | 7-46 | 800-1800 | 60 | 4 | 305 | -Coal washing | |
150 E-L | 120 | 115-486 | 12-51.5 | 800-1500 | 65 | 4 | 381 | -Wet crushers | |
200 E-L | 120 | 234-910 | 9.5-40 | 600-1100 | 64 | 4 | 457 | -Phosphate matrix | |
250 F-L | 120 | 396-1425 | 500-800 | 77 | 5 | 550 | -Minerals concentrate | ||
300 S-L | 560 | 468-2538 | 8-60 | 400-950 | 79 | 5 | 653 | -Lime grinding | |
350 S-L | 560 | 650-2800 | 10-59 | 400-840 | 81 | 5 | 736 | -FGD waste water | |
400 ST-L | 560 | 720-3312 | 7-51 | 300-700 | 80 | 5 | 825 | -Flotation | |
450 ST-L | 560 | 1008-4356 | 9-48 | 300-600 | 80 | 5 | 933 | -Process chemical | |
550 TU-L | 1200 | 1980-7900 | 10-50 | 250-475 | 86 | 5 | 1213 | -Pulp and paper |
Selection & Performance Chart
Shijiazhuang Shiza Pump Industry Co.,Ltd.
Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.
Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.
Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.
Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.
Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.