Deep Well Vertical Submerged Centrifugal Pump , High Concentration Centrifugal Sump Pump

Deep Well Vertical Submerged Centrifugal Pump , High Concentration Centrifugal Sump Pump

​Model meaning

100QV-SP(R)

100---Outlet diameter (mmQ
RV---Frame type
SP---Slurry pump submerged in sump

R---Rubber liner

Vertica pump parts :

Knowledge for slurry pump

The problem for centrifugal pump puming no water and vacuum

When centrifugal pump working , there will always be a variety of problems.The failure of centrifugal pump pumping water is one of problems

1) the vibration of the pump body is large, and the dynamic and static ring of the mechanical seal will intermittently collide and cause leakage.

2) the pressing of the mechanical seal's dynamic and static ring is the sum of the medium pressure and the pretightening force of the spring. When the air is pumped, the pressure of the medium will not, the contact pressure of the dynamic and static ring will become smaller and the seal is invalid.

3) after the pump is evacuated, the mechanical seal end face of the mechanical seal ring has lost the cooling and lubrication, dry friction and mechanical seal failure by using the self flushing scheme (that is, using the pump medium).

1, the motor current is down.

2, the pressure fluctuates greatly.

3, abnormal flow of flow.

4. The sound of murmurs.

5, the pump body vibrates.

6, the pump cylinder temperature rises.

Some reasons of pumping no water

1, gas leakage at the entrance of the centrifugal pump.

2, the entrance of the centrifugal pump is blocked.

3, the pressure of the entrance of the centrifugal pump is not enough.

4. The temperature of the inlet of the centrifugal pump is too high and the saturated steam is too large.

5, the inlet valve of the centrifugal pump is not open or the valve core is broken off.

6, the outlet of the centrifugal pump is too large (small).

7. The centrifugal pump seals the oil with water.

8. The liquid level in the centrifugal pump tower or container is low or no liquid level.

9. The impeller of the centrifugal pump or the inner grinding ring is badly worn.

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.