
Horizontal Minerals Heavy Duty Slurry Pump for Soda Ash & Kaolin Industries
Introduction:
SH/75D(4/3D-) is heavy duty,metal lined horizontal slurry pump, the capacity is 86.4-198m3/h with 9-52m Head.
SH series Centrifugal Horizontal Heavy Duty Slurry Pumps are designed for handling highly abrasive,high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. The pump is interchangeable with WAR-MAN slurry pump.
Specifications:
Model | SH/75D |
Oulet | 3-inch |
Capacity | 86.4-198m3/h |
TDH | 9-52m |
Rated Motor Power | 30Kw |
Speed | 1000-2200r/min |
NPSH | 4-6m |
Construction of SH Slurry Pumps:
Slurry Pump Wet Parts
Liners – Common material hard metal liners are completely interchangeable
with pressure molded elastomer. Elastomer seal rings back all liner
joints. Easily replaceable liners are bolted, not glued, to the
casing for positive attachment and east of maintenance.
Impeller – Common material hard metal and molded elastomer impellers are
completely interchangeable. Front and rear shrouds have pump out
vanes that reduce recirculation and seal contamination.
Throat bush – Common material hard metal and molded elastomer impellers are
completely interchangeable. Wear is reduced and maintenance
simplified by the use of tapered mating faces to allow positive
accurate alignment during assembly and simple removal.
Parts No.
018:Cover Plate Liner
013:Cover Plate
032:Frame Plate
036: Frame Plate Liner
041: Frame Plate Liner Insert
060: Intake Joint
083:Throat bush
110:Volute Liner
122: Stuffing Box Seal
124: Volute Cover Seal
132: Discharge Joint
147: Impeller
SH Series Slurry Pump Shaft Seal
Gland Seal
Most popular type of seal. Clean water at a certain pressure being injected into the packing through the lantern restrictor, preventing leakage from casing.
Expeller Seal
The expeller generate a reverse centrifugal force to prevent the leakage. Suitable for most slurry pumping applications providing a major advantage where no gland water is required.
Mechanical Seal
Mechanical seal is used for applications where no extra substance is allowed to mix with the fluid being pumped, such as chemical or food industry.
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Performance Curve:
SH Series Metal Slurry Pump Specifications & Prices | ||||||||||||
Pump Model | S×D (inch) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | Pricing | ||||||
Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | NPSH (m) | No. of Vanes | Vane Dia. (mm) | Weight (kg) | |||||
Impeller | m3/h | l/s | ||||||||||
SH/25B | 1.5×1 | 15 | Metal (A05) | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 | 91 |
SH/40B | 2×1.5 | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 | 118 | ||
SH/50C | 3×2 | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 | 191 | ||
SH/75C | 4×3 | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 | 263 | ||
SH/75D | 4×3 | 60 | 245 | 363 | ||||||||
SH/100D | 6×4 | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 | 626 | ||
SH/100E | 6×4 | 120 | 365 | 728 | ||||||||
SH/150E | 8×6 | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 | 1473 | ||
SH/150F | 8×6 | 260 | 510 | 1496 | ||||||||
SH/150R | 8×6 | 300 | 510 | 1655 | ||||||||
SH/200F | 10×8 | 260 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3193 | ||
SH/200ST | 10×8 | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3750 | ||
SH/250F | 12×10 | 260 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 3760 | ||
SH/250ST | 12×10 | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 4318 | ||
SH/300ST | 14×12 | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 | 6409 | ||
SH/350TU | 16×14 | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 | 10000 |
Shijiazhuang Minerals Equipment Co. Ltd
CNSME is a leading Chinese manufacturer and supplier of slurry pumps, with over 20 years of industry experience. As a pioneer in the field, we specialize in producing high-quality pumps, including vertical slurry pumps, horizontal slurry pumps, heavy-duty slurry pumps, froth pumps, centrifugal pumps, gravel pumps, desulfurization pumps, and various slurry pump spare parts.
Our products are widely used in numerous applications such as mining, mineral processing, tailings disposal, dredging, construction, metallurgy, power plants, wastewater treatment, as well as the chemical and petroleum industries. Over the years, CNSME has earned the trust and praise of customers both domestically and internationally through its excellent technology and superior service.
At CNSME, we are committed to continuous innovation and improving product performance to provide efficient and reliable solutions that meet the demands of various complex working conditions. We boast a professional technical team and state-of-the-art production facilities, ensuring that each pump meets the highest standards and helps our clients achieve outstanding operational results.
No matter where you are or what type of pump you need, CNSME can offer you the best solution. We look forward to cooperating with you and advancing the industry together.