
Cisco Catalyst 4500 Series 1400W DC power supply with integrated power entry module (PEM).
PWR-C45-1400DC-P Specification | |
DC-input voltage | –48 to –60 VDC (data only) –48 to –56 VDC (inline devices) |
DC-input current | 31 A @ –60 VDC (data only) 180 A maximum @ –48 VDC input (data and inline devices) The input power is configurable in the CLI. The Cisco IOS command is power dc input. Configure the switch software to match the requirements of your switch. |
Power supply output capacity | Data – 12 VDC @120 A, – 3.3 VDC @ 10 A – 140 A total maximum (35 A maximum each per 5 channels) @–48 to –60 VDC input (inline devices) 1367 W+ 40 W redundant mode (data) 7500 W maximum each in redundant mode (PoE) |
DC-input terminal block | Accepts 10 to 12 AWG size copper wire. The actual size of the wire needed is determined by the installer or the local electrician. Terminal block material is rated at 150°C |
Output holdup time | 4 ms |
Heat dissipation | 159 BTUs/hr (data) 2905 BTUs/hr (data and voice) |
Our stock support good price
C1000-48P-4G-L | C9500-NM-8X | CAB-SPWR-30CM |
C1000-48T-4G-L | C9800-F-X-K9 | C9200L-STACK-KIT |
WS-C2960X-24TS-LL | N9K-C93180YC-FX | PWR-C4-950WAC-R |
WS-C2960X-24PSQ-L | N3K-C3172PQ-XL | C9200-NM-4G |
WS-C2960X-24PS-L | N2K-C2348UPQ | C9200-NM-4X |
WS-C2960X-48TS-L | AIR-AP1832I-H-K9 | C9300-NM-4G |
WS-C2960L-24PS-AP | AIR-AP2802I-H-K9 | C9300-NM-8X |
WS-C2960L-16TS-LL | C9115AXI-H | GLC-LH-SMD |
WS-C2960L-8TS-LL | C9120AXI-H | SFP-10G-SR |
WS-C3560-48FS-S | AIR-AP1562I-H-K9 | SFP-10G-LR |
WS-C2960X-24PS-L | AIR-AP1562D-H-K9 | SFP-10G-SR-S |
C9200L-48P-4X-E | C9800-L-C-K9 | SFP-10G-LR-S |
C9200L-48P-4G-E | C9800-L-F-K9 | GLC-TE |
C9200L-24T-4G-E | AP505 | SFP-H10GB-CU2M |
C9300-24T-A | AP515 | MA-CBL-40G-3M |
C9300-48T-A | CP-3905 | GLC-LH-SMD= |
C9300-24S-A | CP-7821-K9 | ISR4331/K9 |
C9300-48S-A | CP-8832-MIC-WIRED | ISR4331/K9 RF |
C9300-48P-E | CS-MIC-TABLE-J | FPR2110-ASA-K9 |
C9300-24P-E | AIR-AP3802I-E-K9 | FPR2110-ASA-K9 |
C9300L-24T-4G-E | C1111-8P | FPR2120-ASA-K9 |
C9300L-48T-4G-E | PWR-C5-125WAC | FPR2130-ASA-K9 |
C9300-NM-8X | PWR-C5-1KWAC | C9200-NM-4G= |
C9400-LC-24S | PWR-C6-125WAC | C9200-NM-4G= |
C9400-LC-48S | STACK-T1-50CM | C9200L-24P-4G-CE |
C9500-24Y4C-A | STACK-T1-1M | C9200L-24P-4G-CE |
C9500-48Y4C-A | STACK-T1-3M | C9200L-48P-4G-E |
LonRise Equipment Co. Ltd.
The Formation of Lonrise
My Company was founded in 2007 as Cisco distributor and integrator domestically.
After 4 years' steadfast development, it spotted the business abroad. Thus Lonrise stepped on the road as a global CISCO supplier which has owned a good reputation within field .
We not only gain a continued trust from old customers but also attract many new customers.
Lonrise company structure
ABOUT US
Lonrise is specialized in supplying new original sealed Cisco equipment. Our product can create tremendous cost effectiveness for our customer. Our superior service makes our customer's purchasing process a comfortable journey. Lonrise concentrates on the construction of Cisco equipment supply Channel. We are the superior network equipment supplier and source of Cisco new equipment. We are the first choice of your Cisco product source.
Our Office in ShangHai:
Business Partners:
Awards Wall:
Lonrise Team:
Lonrise can low your cost of networking infrastructure. We supply new Cisco equipment around 65%-90% based on global list price. We endeavor to keep our price as low as possible. And meanwhile we struggles to give our best service till each details.
Lonrise supplies all new factory sealed Cisco equipment, including Cisco Routers, Cisco Switches, Cisco Firewall, Cisco module and relative Cisco software and license.
Lonrise people believe that only through creditable management and utmost service, we can win reputation for our company.