Low Noise Roll Feeder Machine , Decoiler Machine Metal Coil Die Processing

Low Noise Roll Feeder Machine , Decoiler Machine Metal Coil Die Processing

The roller feeder is used with the punching machine. When the punching machine needs to be re-punched after replacing the new mold, the feeding height, rocker position, material thickness and feeding time of the roller feeder are required according to the new mold and the new stamping process. Systematic adjustment of feeding step and relaxation position to ensure efficient stamping production.

The adjustment process of the roller feeder during the test mode is as follows:

1. Adjustment of feeding height: The height of the lower molds of different molds is usually inconsistent. If it is inconsistent after replacement, this adjustment is needed. The adjustment method is to loosen the fixing bolts on the feeder mounting plate.

Then, adjust the upper and lower adjustment bolts up and down until the height of the feeder is the same as the height of the lower template of the punching die, and then tighten the bolts on the mounting plate to complete the adjustment of the height of the feeder.

2. Adjustment of the position of the rocker arm: After the height adjustment of the roller feeder is adjusted, the angle between the rocker arm and the drive shaft changes. At this time, the rocker arm must be adjusted to avoid the breakage during operation, and the rocker arm adjustment method In order to run the punch slider to the top dead center position, adjust the length of the pull rod so that the pull rod and the rocker arm become 90 degrees.

3. Material thickness adjustment: Adjust the feeding gap between the upper and lower feeding rollers through the material thickness adjusting plate, and adjust the pressure to adjust the spring to ensure that there is no relative sliding between the roller and the material when the feeding device feeds the material.

4. Feeding time adjustment: According to the demand of the mold, set the feeding time on the eccentric disk of the roller feeder.

5. Feeding step adjustment: loosen the feeding step adjustment screw and rotate the adjusting screw so that the adjusted feeding step is consistent with the required feeding step of the mold.

6. Relax the position and time adjustment of the screw: When the punching guide of the punching die enters the guiding hole, adjust the loose bracket so that it just touches the outer edge of the Palin, so that the upper roller of the feeding machine is within 0.5mm of the material, and the material can be in the two rollers. Swipe between them.

Products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.