
Product Description
Our tube rolling line can produce many types of welded pipes,such as H32 H50 H76 H127.
Take H50 tube rolling line for example
The tube rolling line is intended for manufacturing of round pipe of Φ16mm-Φ50mmwith thickness of 0.5mm–2.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
What is the Features of tube rolling line?
1.It supports many kinds of material like carbon steel, GI and others.
2.One tube rolling line could make a large range of pipe sizes by changing mold.
3.One machine could be used to make square pipe, round pipe by changing mold.
4.The pipe made by this kind of tube rolling line could be used in many areas like water tube, wire pipe and others
What is the working flow of stube rolling line
SteelTape→→ Double-head uncoiler →→Strip-head Cutter and welder→→Spiral accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ Removing External and internal burr→→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
What is the specifications of tube rolling line?
name | tube rolling line |
a) Steel Pipe Specification | |
Pipe diameter: | Ø16–Ø50mm |
Pipe Thickness: | 0.5– 2.5mm |
Square Pipe: | 14X14mm –40X40mm |
Rectangle Pipe: | 10X20mm –40X50mm |
Pipe Thickness: | 0.5–2.0mm |
Pipe Length: | 6-9m |
Length Tolerance: | 0-3mm |
b) SteelTape Specification | |
Material: | Low Carbon steel (δb≤500Mpa, δs≤235Mpa) |
Steel Tape: | |
Inner diameter: | Φ580-Φ610mm |
Outer diameter: | Φ900-1500mm |
Strip steel width: | 60mm-200mm |
Strip steel thickness | 0.5mm-2.5mm |
The maximum weight: | 3.0 tons |
c) Electricity | |
Dynamic power: | AC380V±10%, 3phases, 50Hz±10% |
Control Power: | AC220V±10%, one phase, 50Hz ±10% |
Electric installed capacity: | appro 450KW |
e) Cooling water | |
Reservoir for High Frequency equipment: | 15 m³, one set |
Reservoir for circulating cooling water: | 15 m³, one set |
f) Compressed air | |
Pressure: | 0.4Mpa |
Flow: | 0.5m3/h |
g)Line speed: | 30-90m/min |
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Hebei tengtian welding pipe equipment manufacturing co., ltd. is a leading domestic professional
manufacturer of welding pipe forming machinery and related products. With more than ten years
of ERW pipe production experience, the factory covers an area of 50,000 square meters, advanced
equipment, the introduction of advanced modern management system,
to ensure the quality of products.
After long-term practice, we have a deeper understanding of users'
needs.
With the growth of the enterprise, we can provide all range of
welded pipe forming machinery from
single machine to complete the pipe mill production line, we also provide "turnkey engineering"
system solutions for our customers from all over the world, including upgrading the old system,
after-sales service completion, test run and worker training
services.
The company adheres to the principle of "quality first, customer
first", the products are exported
to South America, southeast Asia, Africa, Europe, Australia, Russia, South Korea and other countries
and regions.
Welcome to our factory, we will provide the most suitable technical
solution and the most reasonable
price for our customers.The company has obtained ISO 9001 certification, CE certification and
international BV certification.
If you want to know more about our products, please click on our
website.
https://www.ttpipemill.com