
20L - 50L Reboiler Fractional Distillation Column for CBD / THC / Hemp oil
——Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Type | JZ-80-T |
Material | stainless steel 304 |
Temperature | Room temp~200/300 ℃(depend on the oil heater) |
Column size | DN80*800-1600mm |
Internals | 10-20 Sieve tray columns. |
Reboiler | 20L-50L |
Receiver size&quantity | 10Lor20L*2 |
Condenser HTA | 0.86 (m2) |
Vacuity | MIN:10mbar(depend on the nature of material and vacuum pump&vacuum pump not included) |
Floor area | length*width*height=1000*800*2700-3500 (mm) |
Power | 0.5KW |
Voltage | 220V-60HZ |
Warranty | 12 Month |
Large-scale industrial Fractional Distillation Columns use reflux to achieve a more complete separation of products. Reflux refers to the portion of the condensed overhead liquid product from a distillation or fractionation tower that is returned to the upper part of the tower as shown in the schematic diagram of a typical, large-scale industrial Fractional Distillation Column. Inside the Fractional Distillation Column, the reflux liquid flowing downwards provides the cooling needed to condense the vapors flowing upwards, thereby increasing the effectiveness of the distillation tower. The more reflux is provided for a given number of theoretical plates, the better the tower's separation of lower boiling materials from higher boiling materials. Alternatively, the more reflux provided for a given desired separation, the fewer theoretical plates are required.
Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea chemical equipment Co.,Ltd
—— We devote to design and develop the equipment of chemical separation and abstraction.
—— We came from East China University of Science and Technology, which we long-term cooperated with later. And now, we serve for many famous universities, such as Tsinghua University , Sun Yat-sen University , etc.
—— We provide equipment of distillation and extraction for the technicians in the area of chemical medicine and food industry.
—— We own senior engineers who have rich experience in chemical engineering.
—— Our products can be used in lab-scale, pilot-scale experiments and small-scale production.
—— The experimental results are more authentic by using our products thanks to the continuous operation during the course of the experiments or pilot-scale experiments.
—— We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI in the past few years, which made us accumulating rich experience.
—— Practical, quality first, service first, reputation first' is the motto that guides the work of DEA team.