
High Borosilicate Glass Molecular Distillation Equipment for CBD / THC / Hemp oi l/ Cannabissativa
—— Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Molecular Distillation Equipment gets its name from the distance in which the vapor stream is condensed. In this case, the evaporator wall generates the vapors as the feed moves by gravity, while being agitated and distributed evenly, down the evaporator wall. The vapor stream travels a "short path" directly to the condenser which is located within the evaporator chamber. Since the vapor stream is immediated condensed, the Molecular Distillation process precludes the vapor from forming vapor pressure. This allows ultimate pressures of 0.001 mbar to be attained. This also allows heat sensitive materials to undergo purification at much lower temperatures preventing degradation. It also allows for very high ambient equivalent temperatures to be achieved. Molecular Distillation Equipment in a plant setting is a continuous process.
TYPE | DZL-5G |
MATERIAL | High borosilicate glass & stainless steel 316 |
TEMPERATURE | Room temp~200 ℃ |
DIAMETER | 80 (mm) |
HEAT EXCHANGER HTA | 0.058 (m2) |
INNER CONDENSING HTA | 0.065 (m2) |
FEED AMOUNT | 500~1500 ( ml/h) |
ROTATION SPEED | 80-390rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0.001mbar(depend on the nature of material and vacuum pump) |
COLD TRAP | Liquid nitrogen/ stainless steel 304 |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 2KW (without pump) |
VOLTAGE | 220V /60HZ |
Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea chemical equipment Co.,Ltd
—— We devote to design and develop the equipment of chemical separation and abstraction.
—— We came from East China University of Science and Technology, which we long-term cooperated with later. And now, we serve for many famous universities, such as Tsinghua University , Sun Yat-sen University , etc.
—— We provide equipment of distillation and extraction for the technicians in the area of chemical medicine and food industry.
—— We own senior engineers who have rich experience in chemical engineering.
—— Our products can be used in lab-scale, pilot-scale experiments and small-scale production.
—— The experimental results are more authentic by using our products thanks to the continuous operation during the course of the experiments or pilot-scale experiments.
—— We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI in the past few years, which made us accumulating rich experience.
—— Practical, quality first, service first, reputation first' is the motto that guides the work of DEA team.